Need Drywall & Insulation Services?

FILL OUT A QUICK 2 MINUTE FORM

Compare Multiple Rates, so you know you’re getting the best deal.

Read the FREE Buyer’s Guide at the bottom, it will help you make the right decision.

The easiest way to find services for your home

Read our buying advice for Drywall & Insulation Services

What are Drywall and Insulation Services?

Drywall and installation services have all the research and latest information about drywalls, their repair, replacement, removal, and installation. Drywall and installation services will provide you with all this information so you can make informed decisions about your drywall project.

Functional features of Drywall and Insulation Services

Whether you want drywall, plaster, soundproofing, or insulation for new construction or existing home or business or if you need repair, removal, or replacement of drywall, insulation, soundproofing, or insulation, you could require drywall services.

Batt, Rolled or Reflective Insulation

You can get the following kinds of insulation installed, repaired, or replaced for the masonry, non-masonry, or foundation walls of your home or business. These types of insulation can also be added to the ceiling, attic, roof and floor as well;

Batts

This is composed of fiberglass or rock wool. It often fits between framing and is used to insulate all the walls, floors, and ceilings of homes and businesses.

Rolled

Rolled insulation is placed between the frame and drywall and works to make your home energy efficient.

Reflective or radiant barrier

Radiant barriers reduce cooling costs and heat. They are composed of highly reflective materials that are often installed in the attic to keep the house cool.

Want recommendation

You could also require insulation for the following areas;

  • Insulation of hot water pipes; to reduce heat loss, energy costs and maintain hot water temperature as it travels to taps insulating hot water pipes is a good idea.
  • Interior soundproofing. To minimize outside sound pollution, invest in blanket insulation
  • Blanket wrapping of a hot water heater. To reduce heat loss and improve the efficiency of the water heater, it can be blanket-warped.

Blown-Inn insulation

You could require installation, repair, or replacement of blown-in insulation for a new or existing construction or addition to your home or business. Blown-in insulation is commonly installed for masonry and non-masonry walls, foundation walls, ceiling, attic, roof, and floor.

Along with clown in insulation, you may also require the insulation of hot water pipes, blanket wrapping of hot water heater, interior soundproofing, and energy-saving radiant barrier protection.

Drywall – Install

For any room in your home or business you can install the following types of drywalls;

Standard drywall installation (hang, tape, sand, and texture)

Drywall is derived from gypsum, and it comes in pre-fabricated planks that are hung or bolted on the framing of the interior. It is never allowed to touch the concrete flooring to avoid moisture wicking up and discourage mold.

Install (hang) drywall only

These pre-made planks are bolted to the framing.

Install Wonderboard or Durarock (backer board for tile)

This cement-based board is often used as a backing for tiles.

Tape, sand, texture only

Where two panels of drywall meet the seam or gap is filled with joint compound, and then drywall tape is applied to cover the nails and joints. It is then sanded to even it out.

Replace acoustic popcorn ceiling with texture to match walls

A popcorn ceiling is textured with a special type of paint to give it a distinct texture. You replace this with the smoother texture on your walls if you wish.

Install moisture proof drywall

You can install moisture-proof drywall in your kitchen or bathroom or in other areas that have high water usage.

Tape and sand joints only

This is the bare minimum of drywalls where the seams are filled and taped over and finally sanded.

Spray texture only

Use spray paint to put in the texture on your drywall.

You can choose from the following types of finishes for your Drywall

  • No finish
  • Smooth finish (no texture) to paint
  • Simple texture (orange peel, knock down)
  • Fire tape only (garage, storage, workroom)
  • Smooth finish to apply wallpaper/ faux painting techniques
  • Complex texture (hand trowelled)
  • Texture to match existing drywall
  • Would also like paint

Drywall – Repair

Drywalls installations in your home or business may face the following repair needs; Nails or screws popping

Patch small holes

Small holes in the drywall are patched with self-adhesive mesh patches followed by a joint compound with a drywall knife.

Replace with new drywall

This involves the removal of the existing drywall.

Water damage to the ceiling

Drywall professionals will cut the water damaged area of the ceiling out and replace it with a new section.

Water damage around tub or shower

If the drywall gets spongy or bulges and is soft, it means that it has water damage. The affected area can be cut out and replaced.

Stress crack

Variations in temperature can result in cracks, especially near the seams.

Patch larger hole

This is achieved by sanding and cleaning the area, sticking a mesh over the area, and filling the hole with putty before evening it with a drywall knife and sanding over for texture.

Water damage in walls

Drywalls that are water damaged can be salvaged if the water damage is quickly contained.

Plaster – Install

Your plastering project for any room in your house or business can be finished in the following ways;

Smooth finish (no texture)

It provides a high-quality finish to walls.

Complex texture

Plaster that provides texture is made from either Portland cement or gypsum and gives varying textures to the walls.

Simple texture

Some people may prefer a textured finish to their walls or ceilings, which is achieved by textured plaster.

Plaster – Repair

You plaster could need repairing because of the following reasons;

Restore deteriorating ornamental plaster

These are restored by taking molds of existing design features and then replicated.

Stress crack

Stresses like temperature variations or normal wear and tear can result in cracks. Repairing plaster cracks is a job for experts that should be conducted before further damage.

Patch small holes

These can be patched up by spackling, fiberglass taping, and repainting.

Water damage in walls

Walls can be salvaged if only small areas are damaged.

Water damage around shower or tub

Can be salvaged by cutting and replacing damaged area if caught early enough

Efflorescence (fluffy white powder forms on the surface)

It means that water is seeping through the floor, and the deposits are being left while the moisture is evaporating.

Sagging (sounds hollow when knocked)

Sagging, bulging is often caused by rotten laths.

Fill larger holes

This is a larger process by which holes are sanded, cleaned, and filled with putty after applying mesh.

Water damage

Water damage is sometimes salvageable, and at other times the whole drywall needs replacing.

Soundproofing

You could require soundproofing for the wall’s windows and floors for the following problems in your residence, apartment, condominium mobile home, or townhouse.

  • Conversation from a neighbouring room
  • Exterior noise (traffic, airplanes, neighbours, etc.)
  • Plumbing pipes and exhaust ducting
  • Loud music
  • Construction noise
  • Rain gutters, downspouts

Spray Foam Insulation – Install

You could require insulation, repair or replacement of spray foam installation for your masonry, non-masonry or foundation walls, attic, floor or ceiling of your existing or new construction to resolve the following problems;

  • Wall framing is exposed or unfinished
  • No framing is exposed – walls remain intact

Budget required for Drywall and Insulation Services

The average budget required for repairing drywall is 275 dollars to 784 dollars according to figures submitted by Home Advisor members.

Conclusion

With the help of drywall and installation services, you will get every detail about the installation, repair, replacement, or relocation of drywalls. Armed with this knowledge, you get to make informed decisions about your project.